Mr Hobby (Gunze) C601 Mr Color IJN Hull Color Kure Lacquer Paint 10ml

Mr Color hobby paint is a paint that has long been regarded highly by modelers world wide as a model paint that delivers an outstanding finish. There are a large number of colours and colour types available, which are suitable for painting almost all models. Generally, Mr Color provides a wider range of paint colours and finishes than Aqueous Hobby Color, and will dry to a smoother and harder finish.

When applying Mr Color paint, 1 to 2 coats are recommended when using paint brushes, and 2 to 3 coats if using an airbrush to spray paint.

If airbrushing Mr Color paint, it should be thinned after diluting to a ratio of between 1 (Mr Color) and 1 to 2 Thinner, depending on the degree of paint viscosity required.

Gloss levels obtained using gloss coat Mr Color hobby paints can be adjusted by using Flat Base - mix approximately 5 to 10% of C-30 Flat Base to convert gloss colors to a semi gloss finish, or 10 to 20% for a matt finish. The percentage of Flat Base used can be adjusted to vary the amount of gloss level obtained.

THINNING RATIO for Mr. COLOR

BRUSH PAINTING
1 : 0.8~1.0
(Mr. COLOR : Mr. COLOR THINNER)

AIRBRUSHING

1 : 1~2
(Mr. COLOR : Mr. COLOR THINNER)
Mr. LEVELING THINNER IS RECOMMENDED FOR AIRBRUSHING

• Must only be thinned with Mr. COLOR THINNER, Mr. COLOR LEVELING THINNER or MR.COLOR RAPID THINNER.
• Do not thin with THINNER FOR AQUEOUS HOBBY COLOR and ACRYSION SOLVENT.
• CHOOSE AN APPROPRIATE THINNER
• Mr. COLOR THINNER: The most basic thinner for Mr. COLOR
• Mr. LEVELING THINNER: Slows down the drying speed. Recommended for gloss paints. Use this thinner to thin Mr. COLOR if airbrushing.
• Mr. RAPID THINNER: Speeds up the drying speed. Recommended for matt paints and metallic paints.

MIXING

CAN BE MIXED WITH

• Mr. COLOR
• Mr. COLOR GX, Mr. METALLIC COLOR GX, Mr. CLEAR COLOR GX
• Mr. COLOR 40TH ANNIVERSARY, Mr. CRYSTAL COLOR, Mr. SUPER METALLIC
  LASCIVUS

CANNOT BE MIXED WITH

• AQUEOUS HOBBY COLOR
• ACRYSION, ACRYSION BASE COLORS
• CLASSY 'N DRESSY COLORS
• Mr. METAL COLOR

AQUEOUS HOBBY COLOR and ACRYSION can be applied over a coat of Mr. COLOR.
Mr. COLOR cannot be applied over a coat of AQUEOUS HOBBY COLOR and ACRYSION.

TIP!

• Use T114 Mr. Paint Remover to remove paint from a surface.
• Clean the tools with Mr. COLOR THINNER or Mr. TOOL CLEANER.
• Mix approximately 5 to 10% of C30 Flat Base to convert gloss colors to a semi gloss finish, or 10 to 20% for a matt finish.
• Mr. HOBBY TOPCOAT and SUPER CLEAR can be applied over a coat of Mr. COLOR.
• Do a test paint before you apply paint on your model kit.

ATTENTION

• Put the lid back on after use.
• Store in a cool and ventilated place, away from direct sunlight.
• Use in a well ventilated area.